Removal - Fold-In-Floor

REMOVAL - FOLD-IN-FLOOR

WARNING: RELEASE FUEL SYSTEM PRESSURE BEFORE SERVICING FUEL SYSTEM COMPONENTS. SERVICE VEHICLES IN WELL VENTILATED AREAS AND AVOID IGNITION SOURCES. NEVER SMOKE WHILE SERVICING THE VEHICLE.

1. Remove fuel filler cap and perform Fuel System Pressure Release procedure. Service and Repair

2. Disconnect negative cable.

3. Drain fuel tank.

4. Remove fuel tank.

5. Use tool #9340 to remove the fuel pump module lock ring (Figure 1).






Figure 1 MODULE LOCK RING NSE

WARNING: THE FUEL RESERVOIR OF THE FUEL PUMP MODULE DOES NOT EMPTY OUT WHEN THE TANK IS DRAINED. THE FUEL IN THE RESERVOIR MAY SPILL OUT WHEN THE MODULE IS REMOVED.

6. Remove fuel pump module and O-ring from tank. Discard O-ring.