Installation

INSTALLATION
1. Install a new gasket, if required.

2. Install throttle body.

3. Tighten throttle body mounting bolts. The 2.4L to 28.2 Nm (250 ± 50 in. lbs.) torque, The 3.3/3.8L to 11.6 Nm (105 ± 20 in. lbs.) torque.

4. Connect electrical connectors to the idle air control motor and throttle position sensor (TPS) (Figure 2) or (Figure 1).

5. Install air inlet to throttle body hose clamp and tighten.

6. Connect negative cable to battery cable.






Figure 1 IAC VALVE LOCATION 3.3/3.8L










Figure 2 IAC VALVE 2.4L