Removal

REMOVAL
1. Disconnect battery negative cable.
2. Remove gearshift knob by pushing down and rotating 1/4 turn clock-wise (Figure 1).




Figure 1 Gearshift Knob Removal/Installation






3. Remove gearshift boot from center console by disengaging at three (3) retaining clips (Figure 2).




Figure 2 Gearshift Boot Removal/Installation






4. Apply park brake to allow park brake handle to clear center console upon removal.
5. Remove two (2) cupholder bottom plugs (Figure 3).




Figure 3 Cup Holder Plugs


1 - CUPHOLDER PLUG (2)

6. Remove four (4) center console-to-gearshift mechanism screws. Remove console assembly (Figure 4).




Figure 4 Center Console Removal/Installation (LHD Shown - RHD Similar)






7. Remove center console support bracket (Figure 5).




Figure 5 Center Console Support Bracket






8. Remove crossover cable retainer clip (Figure 6).




Figure 6 Crossover Cable Retainer Clip






9. Remove crossover cable from gearshift mechanism (Figure 7).




Figure 7 Crossover Cable at Gearshift Mechanism






10. Remove selector cable retainer clip (Figure 8).




Figure 8 Selector Cable Retainer Clip


1 - RETAINER CLIP

11. Remove selector cable from gearshift mechanism (Figure 9).




Figure 9 Selector Cable at Gearshift Mechanism






12. Remove four (4) gearshift mechanism-to-park brake bracket nuts. Remove gearshift mechanism from bracket (Figure 10).




Figure 10 Gearshift Mechanism Removal/Installation (RHD Shown - LHD Similar)