Removal

REMOVAL

The Power Transfer Unit must be removed from the vehicle to service this seal. Refer to Power Transfer Unit Removal for procedures.

1. Remove P.T.U. end cover bolts (Figure 1).




Figure 1 P.T.U. End Cover Bolts






2. Gently tap on end cover ears to separate cover from case (Figure 2).




Figure 2 End Cover Removal






3. Remove ring gear oil trough (Figure 3).




Figure 3 Oil Trough






4. Remove input shaft and ring gear from case (Figure 4).




Figure 4 Input Shaft and Ring Gear Removal






5. Use Special Tool No. 7794-A (seal puller) to remove seal (Figure 5).




Figure 5 Seal Removal