Assembly - Caliper Guide Pin Bushings (Continental Teves Brakes)

ASSEMBLY - CALIPER GUIDE PIN BUSHINGS (CONTINENTAL TEVES BRAKES)

1. Fold the guide pin bushing in half lengthwise.

NOTE: To avoid damage to the bushing, do not use a sharp object to install the guide pin bushing.

2. Insert the folded bushing into the caliper mounting boss using your fingers from the rear of the caliper.
3. Unfold the bushing using your fingers or a wooden dowel until the bushing is fully seated into the caliper housing. The bushing flanges should be seated evenly on both sides of the bushing hole.
4. Lubricate inside surfaces of bushing using Mopar(R) Dielectric Grease or equivalent.
5. Repeat the procedure for remaining bushing.