Sunroof / Moonroof: Description and Operation

DESCRIPTION





SUN ROOF ASSEMBLY





WARNING: Keep fingers and other body parts out of sunroof opening at all times.


The sun roof features consists of:

- Sun roof glass
- Sun roof sun shade

The sunroof power sliding glass panel and sunshade can be positioned anywhere along its travel, rearward of glass panel front edge.

The sunroof is electrically operated from a switch located in the overhead console. To operate the sunroof the ignition switch must be in the Accessory or On/Run position. The open/close switch is a rocker style design that open or close the sunroof; the vent switch is a push-button design. The 'express-open' function of the motor is triggered by a single quick press-and-release of the 'open' button. This causes the glass panel to retract to the comfort-open position. The wind deflector will deploy as the glass panel retracts. Quickly pressing and releasing the 'open' button. a second time will cause the glass panel to retract fully under the roof. The operator can control the position of the glass panel by pressing and holding the open button until the glass panel has reached the desired position. Neither the close nor vent buttons have 'express' functionary. These buttons must be held until the glass panel has reached the desired position. The sunroof will also operate for up to fifteen minutes after the ignition key is turned off for customer comfort and convenience while parking.