Installation

INSTALLATION




1. If removed, install the intake air temperature (IAT) sensor.
2. If removed, install the two resonator mounting brackets (4) to the top of the engine and install the retaining bolts (3). Tighten the bolts securely.
3. Position the resonator (2) to the top of the engine and connect it the throttle body (5). Make sure the resonator is properly installed over the throttle body inlet.
4. Install the two bolts (1) that secure the resonator to the resonator mounting brackets. Tighten the bolts securely.
5. Connect the engine wire harness connector to the IAT sensor.
6. Install the air intake hose.
7. Reconnect the negative battery cable.