Installation

INSTALLATION





1. Install the passenger side instrument panel duct (3) onto the driver/center instrument panel duct (7). Make sure the ducts are fully engaged to each other.

2. Install the instrument panel ducts onto the instrument panel as an assembly. Make sure the center duct outlets are fully engaged into the instrument panel front cover (5).

3. Install the two screws (6) that secure the driver side/center instrument panel duct to the instrument panel front cover. Tighten the screws to 2 Nm (17 in. lbs.).

4. Install the four screws (4) that secure the passenger instrument panel duct to the instrument panel front cover. Tighten the screws to 2 Nm (17 in. lbs.).

5. Install the two screws (1) that secure the driver side/center instrument panel duct to the rear of the instrument panel support (2). Tighten the screws to 2 Nm (17 in. lbs.).





6. Connect the center distribution duct (2) to the instrument panel duct (3).

7. Install the two screws (1) that secure the center distribution duct to the instrument panel support. Tighten the screws to 2 Nm (17 in. lbs.).

8. Install the demister ducts (2 and 6).

9. Install the two screws (3) that secure the instrument panel wire harness (4) to the instrument panel support (5). Tighten the screws to 2 Nm (17 in. lbs.).

10. Install the defroster duct (1).

11. Install the instrument panel top cover.

12. Install the instrument panel.