Installation

INSTALLATION
1. Install spring to housing and door

2. Snap door into housing.

3. Insert lockout link into clip on fuel fill door.

4. Engage clip to hold link to fuel fill door.

5. Insert lockout link through grommet in panel between inner and outer quarter panel.

6. Close fuel fill door.

7. Install fuel filler housing to outer quarter panel.

8. Verify that all clips on fuel filler housing are fully engaged to outer quarter panel.

9. Place fuel fill neck in position.

10. Install screws to hold fuel fill neck to fuel filler housing.

11. Engage latch release link into clip on fuel fill blocker latch arm.

12. Verify fuel fill blocker latch operation.

13. Install water shield patch to cover access hole in C-pillar.

14. Install left quarter trim panel.