Installation - 3.3/3.8L

INSTALLATION - 3.3/3.8L
1. Install TPS to throttle body.

2. Disconnect the purge vacuum line from the throttle body.

3. Install throttle body.

4. Install 3 mounting bolts from throttle body. Tighten bolts.

5. Install the throttle and speed control cables to throttle body.

6. Connect the electrical connector at TPS.

7. Connect the electrical connector at IAC.

8. Install the air cleaner box lid. Install hose to throttle body.

9. Install the electrical connector to the Inlet Air Temperature sensor.

10. Connect the negative battery cable.