Installation - Fold-In-Floor

INSTALLATION - FOLD-IN-FLOOR

NOTE: Be careful not to allow dirt/debris to fall into the fuel tank.


1. Wipe seal area of tank clean and place a new O-ring seal in position on pump.

2. Position fuel pump module in tank.

3. Tighten lockring using special tool #9340 to install the lockring (Figure 1).

4. Install fuel tank.

5. Lower vehicle.

6. Connect negative cable battery.

7. Fill fuel tank. Use the DRB III(R) scan tool to pressurize the fuel system. Check for leaks.

8. Install fuel filler cap.






Figure 1 MODULE LOCK RING NSE