Removal

REMOVAL




Figure 1 Transmission Connectors







NOTE: If solenoid/pressure switch assembly is being replaced, the "Quick-Learn" procedure must be performed.

1. Disconnect battery negative cable.
2. Remove air cleaner assembly.
3. Disconnect solenoid/pressure switch assembly connector (1) (Figure 1).
4. Disconnect input speed sensor connector (2).




Figure 2 Input Speed Sensor


1 - INPUT SPEED SENSOR

5. Remove input speed sensor (1) (Figure 2).




Figure 3 Solenoid/Pressure Switch Assembly-to-Case Bolts






6. Remove three solenoid/pressure switch assembly-to-transaxle case bolts (1) (Figure 3).




Figure 4 Solenoid/Pressure Switch Assembly and Gasket






7. Remove solenoid/pressure switch assembly (1) (Figure 4)and gasket (2). Use care to prevent gasket material and foreign objects from become lodged in the transaxle case ports.