Removal

REMOVAL

LHD

1. Disconnect battery negative cable.
2. Remove instrument panel lower silencer (Figure 1).




Figure 1 INSTRUMENT PANEL LOWER SILENCER, LHD SHOWN


1 - INSTRUMENT PANEL LOWER SILENCER

3. Remove knee bolster(Figure 2).




Figure 2 KNEE BOLSTER, LHD SHOWN


1 - KNEE BOLSTER

4. Remove upstop switch by depressing four (4) plastic wing tabs, and sliding switch through mounting bracket. If necessary, remove mounting bracket and remove switch (Figure 3).




Figure 3 Interlock/Upstop Switch Location







RHD

1. Disconnect battery negative cable.
2. Remove instrument panel lower silencer (Figure 1).
3. Remove knee bolster (Figure 2).
4. Disconnect upstop switch connector (Figure 4).
5. Remove upstop switch/bracket-to-clutch pedal bracket nut. Remove switch(Figure 4).




Figure 4 Clutch Pedal Upstop Switch-RHD