Lower Control Arm Bushings - 4X2 - (LD)

LOWER CONTROL ARM BUSHINGS - 4X2 - (LD)

FRONT BUSHING





1. Install the bushing (3) using special tool C-4212F (PRESS) (1), 9775-1 (receiver) (5), 9775-4 (driver) (2) and 9775-2 (SPACER) (4)

REAR BUSHING





1. Install the bushing using special tool C-4212F (PRESS) (1), 9775-1 (receiver) (2), 9775-3 (driver) (4) and 9775-2 (SPACER) (3)
2. Remove the control arm from the vise.
3. Install the lower control arm.
4. Perform a wheel alignment.