Installation

INSTALLATION




1. Apply a 6.35mm (1/4 in.) bead of Mopar(R) Silicone Rubber Sealant (1) or equivalent to the cover (2).

CAUTION: If housing cover is not installed within 3 to 5 minutes, the cover must be cleaned and new RTV applied. Failure to follow these instructions will result in a leak.

2. Install cover and identification tag. Tighten cover bolts in a criss-cross pattern to 41 Nm (30 ft. lbs.).
3. Fill differential with lubricant to specifications.
4. Install fill plug.