Lamp - Tailgate

LAMP - TAILGATE






NOTE: This lamp is used on vehicles with a pick-up bed and dual rear wheels only. This lamp has a red lens, contains three bulbs and is located on the rearward facing surface of the pick-up bed sill panel below the tailgate.

1. Disconnect and isolate the battery negative cable.

2. Reach under and behind the rear bumper near the center to access and disconnect the tailgate marker lamp (3) pigtail wire connector (4) from the wire harness connector (5).

3. Remove the two screws (1) that secure the tailgate marker lamp to the outer sill panel.

4. Remove the lamp from the sill panel.