Assembly

ASSEMBLY




PRIMARY REGULATOR VALVE

1 - PRIMARY REGULATOR VALVE

1. Lubricate the primary regulator valve (1) with MOPAR(R) AS68RC ATF and install it into the oil pump.




SECONDARY REGULATOR VALVE

1 - SECONDARY REGULATOR VALVE

2. Lubricate the secondary regulator valve (1) with MOPAR(R) AS68RC ATF and install it into the oil pump.




OIL PUMP






3. Lubricate the driven gear (2) and the drive gear (3) with MOPAR(R) AS68RC ATF and install them into the oil pump.




4. Insert a guide bolt (1), or dowel into the oil pump assembly guide hole to properly align both halves of the oil pump.




5. Install the bolts securing the oil pump to the oil pump cover.
6. Torque bolts in a crisscross pattern to 21 Nm (15 ft.lbs.).




OIL PUMP NYLON THRUST WASHER

1 - NYLON THRUST WASHER

7. Lubricate the nylon thrust washer (1) with MOPAR(R) AS68RC ATF and install it onto the oil pump.




OIL PUMP SEAL RINGS

8. Lubricate the seal rings (1) with MOPAR(R) AS68RC ATF and install them onto the oil pump.




OIL PUMP O-RING

9. Lubricate the O-ring (1) with MOPAR(R) AS68RC ATF and install it onto the oil pump.