B2324

B2324-HEADLAMP WASHER MOTOR CONTROL CIRCUIT HIGH

For a complete wiring diagram refer to Diagrams/Electrical.

- When Monitored:
- With the ignition on.
- Set Condition:
- When the TIPM detects a short/HIGH condition.






Diagnostic Test

1. HEADLAMP WASHER RELAY

Turn the ignition off.

Replace the Wiper relay with and known good relay.

With the scan tool, clear all TIPM DTC's.

Turn the Rear Wipers ON then OFF.

With the scan tool, read the TIPM DTC's.

Does the scan tool read: B2324-HEADLAMP WASHER MOTOR CONTROL CIRCUIT HIGH?

Yes

- Replace the Totally Integrated Power Module.
- Perform the BODY VERIFICATION TEST - VER 1. Body Verification Test

No

- Test complete.
- Perform the BODY VERIFICATION TEST - VER 1. Body Verification Test