EBC 125 RWAL

C2206-VEHICLE CONFIGURATION MISMATCH (EBC125)

For a complete wiring diagram Refer to Diagram/Electrical. Electrical Diagrams

- When Monitored:

Ignition on.

- Set Condition:

This DTC will set if the vehicle type is not identified or incorrectly identified.





Diagnostic Test

1. ANTI-LOCK BRAKE MODULE

NOTE: Diagnose and repair any Powertrain Control Module VIN or Communication DTCs before continuing with this test.

NOTE: If C2202-Original VIN Mismatch / Missing is set along with this DTC, perform the diagnostic procedure for C2202 before continuing with this test.

Turn the ignition on.

With the scan tool, clear DTCs.

Turn the ignition off.

Turn the ignition on.

With the scan tool, select View DTCs.

Is the status Active for this DTC?

Yes

- Replace the Antilock Brake Module.
- Perform ABS Verification ABS Verification Test

No

- Use the scan tool to read DTCs in all other modules. If any communication DTCs are present, perform the appropriate diagnostic procedure. Refer to any Technical Service Bulletins that apply. If no problems are found, test is complete.