U1415

U1415-IMPLAUSIBLE/MISSING VEHICLE CONFIGURATION DATA

For a complete wiring diagram refer to Diagrams/Electrical.

- When Monitored:

With the ignition on. The ORC on board diagnostics loads the ORC Configuration Data from the Totally Integrated Power Module (TIPM) CAN Bus message.

- Set Condition:

This DTC will set if the CAN Bus message was received but the TIPM information is invalid or corrupt.






Diagnostic Test

1. OCCUPANT RESTRAINT CONTROLLER

Replace the Totally Integrated Power Module (TIPM)

NOTE: Check connectors - Clean and repair as necessary.



Yes

- Select appropriate symptom from Symptom List. Repair all TIPM active DTC and before diagnosing the ORC DTC.

No

- Replace the Totally Integrated Power Module (TIPM).
- Perform *ORC VERIFICATION TEST - VER 1. Occupant Restraint Controller (ORC) Verification Test