B2209

B2209-OCCUPANT RESTRAINT CONTROLLER INTERNAL 3

- When Monitored:

With the ignition on. The module's on board diagnostics continuously performs internal circuit tests.

- Set Condition:

This DTC will set if the module identifies an out of range internal circuit.






Diagnostic Test

1. REPLACE OCCUPANT RESTRAINT CONTROLLER

Turn the ignition on.

WARNING: To avoid serious or fatal injury, turn the ignition off, disconnect the battery and wait two minutes before proceeding.

WARNING: If the Occupant Restraint Controller is dropped at any time, it must be replaced. Failure to take proper precautions could result in accidental airbag deployment and serious or fatal injury.

When this code is set, view repair.

Repair

- Replace the Occupant Restraint Controller.
- Perform *ORC VERIFICATION TEST - VER 1. Occupant Restraint Controller (ORC) Verification Test