Installation

INSTALLATION




1. If required, install new plastic inserts (4) into the front fender (7).

2. Position the front fender onto the body and loosely install all fender retaining bolts.

3. Align the front fender and add shims, if required.

4. Tighten the bolts (2 and 6) to 9 Nm (80 in. lbs.).

5. Tighten the bolts (1, 3 and 5) to 12.5 Nm (9 ft. lbs.).

6. Install the wheelhouse splash shield.

7. Install the headlamp unit.

8. Install the cowl grille.

9. Install the battery tray, if required.

10. Install the antenna.