Vehicle Theft Security System

B210E-BATTERY VOLTAGE HIGH






For a complete wiring diagram refer to Diagrams/Electrical.

- When Monitored:

With the ignition on.

- Set Condition:

If the Sentry Key Remote Entry Module (SKREEM) detects voltage is above a calibrated value on the (A114) Fused B(+) circuit.






Diagnostic Test

1. VERIFY THAT THE DTC IS ACTIVE

CAUTION: Diagnose and repair all Powertrain DTCs before continuing.

Turn the ignition on.

With the scan tool, record and erase the SKREEM DTCs.

Perform 5 ignition cycles, leaving the ignition switch on for a minimum of 90 seconds per cycle.

Using the scan tool, read the SKREEM DTCs.

Does the DTC reset?

Yes

- Replace and program the SKREEM.
- Perform SKREEM VERIFICATION TEST. Vehicle Theft Security Verification Tests

No

- Perform SKREEM VERIFICATION TEST. Vehicle Theft Security Verification Tests