Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2007 >> RAM 3500 Truck 4WD L6-6.7L DSL Turbo VIN A >> Repair and Diagnosis >> Body and Frame >> Interior Moulding / Trim >> Passenger Assist Handle >> Service and Repair >> A-Pillar Trim/Grab Handle >> Installation

Installation






INSTALLATION




1. Position the locating tab of the A-pillar trim panel (2) into the slot located in the top of the instrument panel.

2. Install the A-pillar trim panel onto the A-pillar (1) and install the two bolts (4). Tighten the bolts to 6 Nm (55 in. lbs.).

3. Close the two fastener covers (3) located in the A-pillar trim panel.

pro multis · About Operation CHARM