Replacing the Antilock Brake Module (EBC125)

*REPLACING THE ANTILOCK BRAKE MODULE (EBC125)





Diagnostic Test

1. REPLACING THE ANTILOCK BRAKE MODULE

NOTE: It may be necessary to call STAR to order a new ABS module.

NOTE: Failure to properly program the ABS module will result in an illuminated or blinking ABS indicator.

Turn the ignition off.

Replace the Anti-lock Brake Module.

With the scan tool, perform the module configuration procedures as necessary.

Road test the vehicle above 40 m.p.h. for at least two minutes.

With the scan tool, select View DTCs in the Anti-Lock Brake Module.

Are there any DTCs present?

Yes

- Perform the appropriate diagnostic procedure(s).

No

- Test Complete
- Perform ABS Verification ABS Verification Test