Engine Oil Pressure: Testing and Inspection

DIAGNOSIS AND TESTING-ENGINE OIL PRESSURE

1. Remove the 1/8 npt plug from the top of the oil filter housing.
2. Install Oil Pressure Line and Gauge Tool C-3292 with a suitable adapter.
3. Start engine and warm to operating temperature.
4. Record engine oil pressure and compare with engine oil pressure chart.

CAUTION: If engine oil pressure is zero at idle, DO NOT RUN THE ENGINE.





If minimum engine oil pressure is below these ranges, Refer to ENGINE - TESTING.

5. Remove oil pressure gauge and install the 1/8 npt plug.