Installation

INSTALLATION




1. Raise axle and slide axle with engine mounting (1) bolts into engine mount.
2. Install engine mount nuts and tighten to 95 Nm (70 ft. lbs.).




3. Install axle shaft tube (1) mounting bolts and nuts (2). Tighten nuts (2) to 95 Nm (70 ft. lbs.).




4. Install axle housing pinion nose mounting bolts (1) and tighten to 95 Nm (70 ft. lbs.).




5. Install vent hose (1) on differential cover tube (2).




6. Install disconnect actuator (1) wiring connector (2).




7. Install suspension crossmember (1), bolts and nuts (2).




8. Install skid plate (1) and bolts (2).




9. Install front propeller shaft (2) with reference marks (4) aligned and tighten bolts to 115 Nm (85 ft. lbs.).
10. Install axle half shafts.