Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2007 >> RAM 3500 Truck 4WD L6-6.7L DSL Turbo VIN A >> Repair and Diagnosis >> Transmission and Drivetrain >> Transfer Case >> Seals and Gaskets >> Service and Repair >> NV271 Transfer Case >> Seal-Front Output Shaft >> Removal

Removal






REMOVAL




1. Remove the front propeller shaft.
2. Install two bolts 180� apart into the front output shaft companion flange.
3. Place Yoke Holder 6719 (1) over the bolts (2) and against the companion flange.
4. Remove and discard the front companion flange nut.
5. Remove the companion flange from the front output shaft. It may be necessary to use Pinion Flange Remover 8992 to remove the companion flange.
6. Using a screw and a slide hammer, remove the front output shaft seal.
pro multis · About Operation CHARM