Removal

REMOVAL




1. Remove inside rear view mirror (3).





2. Remove cowl grille (2).





3. Remove the a-pillar weatherstrip retainer (1).





4. Remove the a-pillar trim panels (2).





5. Remove the headliner (9) and from the inside of the vehicle, cut the upper urethane bonding from around windshield upper edge using a suitable sharp cold knife (C-4849). A pneumatic cutting device can be used but is not recommended.

6. From the outside of the vehicle, cut urethane bonding from the remaining sides of the windshield using a suitable sharp cold knife (C-4849). A pneumatic cutting device can be used but is not recommended.

7. Separate windshield from vehicle.