Bulb

BULB

CAUTION: Always use the correct bulb size and type for replacement. An incorrect bulb size or type may overheat and cause damage to the lamp, the socket or the lamp wiring.




1. Align the base of the bulb with the entry/exit lamp bulb socket (2).
2. Push the bulb into the socket until the base is fully seated.
3. Firmly grasp the entry/exit lamp housing (1) in one hand, then align the socket and bulb with the keyed opening on the back of the lamp.
4. Insert the socket and bulb straight into the lamp until the socket is fully seated.
5. Rotate the socket clockwise about 30 degrees to lock it into place.
6. Reinstall the entry/exit lamp into its mounting location.
7. Reconnect the battery negative cable.