Single Rear Wheel (SRW)

SINGLE REAR WHEEL (SRW)




1. Install the stabilizer bar (4) to the axle. Tighten to 60 Nm (44 ft. lbs.) (M10 Bolt) or 120 Nm (88 ft. lbs.) (M12 X 1.5 Bolt).
2. Install the stabilizer bar bushing (3)
3. Install the stabilizer bar bracket (2) and bolts (1), center the bar (4) then tighten to 60 Nm (44 ft. lbs.).




4. Install the stabilizer bar (4) to the stabilizer links (2) and tighten the nut and bolt (3) to 106 Nm (78 ft. lbs.).
5. Lower the vehicle.