Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2008 >> Avenger V6-3.5L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Camshaft Position Sensor >> Service and Repair >> Camshaft Position Sensor - Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Camshaft Position Sensor - Installation







3.5L





CAUTION: Install camshaft position (CMP) sensor utilizing twisting motion. Make sure CMP sensor is fully seated. Do not drive CMP sensor into the bore with mounting screw. This may cause CMP sensor to be incorrectly seated causing a faulty signal or no signal at all.

1. Install camshaft position CMP sensor (2) and mounting bolt (1). Tighten bolt to 12 Nm (106 in. lbs.).
2. Connect electrical connector (3) to camshaft position CMP sensor (2).
3. Connect negative battery cable, tighten nut to 5 Nm (45 in. lbs.).
pro multis · About Operation CHARM