Installation

UNIT





1. Connect the courtesy/reading lamp (1) electrical connector (2).




2. As shown from the backside, insert the unit tab (2) up into the headliner to the left first of all. Then push up the right side up into the headliner. The lens tab (1) will hold up the right side of the courtesy/reading lamp unit.




NOTE: When installing the lens (5), make sure that the tab on the lens (4) is inserted on the right side of the courtesy/reading lamp unit first.





3. Once the right side tab (2) is in the headliner, roll up the left side of the lens (3) until it snaps into place at (1).