Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2008 >> Caliber L4-2.0L >> Repair and Diagnosis >> Restraints and Safety Systems >> Air Bag Systems >> Air Bag Control Module >> Service and Repair >> Occupant Restraint Controller - Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Occupant Restraint Controller - Removal







REMOVAL





1. Open hood.
2. Disconnect and isolate the battery negative cable.

WARNING: Wait two minutes for the airbag system reserve capacitor to discharge before beginning any airbag system or component service. Failure to do so may result in accidental airbag deployment, serious or fatal injury.

3. Remove the floor shifter bezel (1) Center Console - Removal




4. It is necessary to lift up but not remove on the jute covered panel (1) covering the ORC (2).




5. Remove the ORC mounting nuts (2).
6. Disconnect the two ORC connectors (4).
7. Remove ORC (3) from vehicle.
pro multis · About Operation CHARM