Front Bumper Fascia - Installation

INSTALLATION










1. Place the front fascia assembly in position and connect the fog lamp wire harness connectors, if equipped.
2. Push the left and front side of the fascia in to the fender mounted fascia mounting brackets.
3. Connect the Tire Pressure Monitoring (TPM) connector.
4. If equipped, connect the headlamp washer system hose from washer reservoir.
5. Raise the vehicle.
6. Install the mounting fasteners that secures the front fascia assembly (9) to the inside of the front fender.
7. Install the belly pan.
8. Install the left and right front splash shields as necessary Splash Shield - Installation.
9. Lower the vehicle.