Removal

REMOVAL





1. Before proceeding with the following repair procedure, review all warnings and cautions. Service Precautions
2. Using a trim stick C-4755 or equivalent, remove the drivers side A-pillar trim.
3. Open the trim covers in the passenger side A-pillar grab handle and remove the bolts.
4. Remove the right A-pillar trim panel.
5. Using a trim stick C-4755 or equivalent, remove the instrument panel defroster grille.
6. Disconnect the sensor electrical connector (3).
7. Disconnect the sun sensor (1) electrical connector, remove the metal clip, and unsnap the clips on sensor.