Shift Motor - Removal

REMOVAL

NOTE: New shift motor assemblies are shipped in the AWD position. If a new shift motor assembly must be installed, it will be necessary to shift the transfer case to the AWD position prior to motor installation.







1. Raise the vehicle on a suitable hoist.
2. Remove front drive shaft. Drive/Propeller Shaft
3. Disengage the wiring connector from the shift motor and mode sensor assembly.
4. Remove the bolts (3) holding the shift motor and mode sensor assembly (2) onto the transfer case (1).
5. Separate the shift motor and mode sensor assembly (2) from the transfer case (1).