Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2008 >> Magnum V8-5.7L >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Knock Sensor >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation







5.7L





CAUTION: Over or under tightening the sensor mounting bolts will affect knock sensor performance, possibly causing improper spark control.

1. Install knock sensor (1) into cylinder block.

NOTE: The foam strip used on bolt threads is used only to retain the bolts to sensors for plant assembly. It is not used as a sealant. Do not apply any adhesive, sealant or thread locking compound to these bolts.

2. Install and tighten mounting bolt (2) to 20 Nm (15 ft. lbs.).
3. Install electrical connector (5) to sensor.
4. Connect negative battery cable and tighten nut to 5 Nm (45 in. lbs.).
pro multis · About Operation CHARM