Front Fascia - Installation

INSTALLATION





1. Install fascia (5) to carrier (3).
2. Connect eight tabs securing the fascia (5) to the grille opening reinforcement.
3. Install two screws (2) to the fascia bracket and tighten to 3 Nm (30 in. lbs.).
4. If equipped, connect the electrical connectors (4) for the fog lamp assemblies on both sides of the vehicle.
5. Install two rivets (7) securing the fascia (5) to the fascia bracket (1) on both sides of the vehicle.
6. Install splash shield, Front Wheelhouse Splash Shield - Installation.
7. Install three push pins (6) securing the fascia (5) to the carrier (3).