Front Fascia - Removal

REMOVAL





1. Remove both of the front wheel liners only enough to gain access to the bolts, Front Wheelhouse Splash Shield - Removal.
2. Remove three front fascia push pins (6) securing fascia (5) to carrier (3).
3. Remove two rivets (7) securing the fascia (5) to fascia bracket (1) for both sides of the vehicle.
4. If equipped, disconnect the electrical connectors (4) from both of the fog lamp assemblies.
5. Remove two front fascia screws (2) from the fascia bracket.
6. Release eight tabs securing the fascia (5) to the grille opening reinforcement.
7. Remove fascia (5) from vehicle.