Removal

REMOVAL





1. Raise and support the hood.
2. Remove the two screws (1) from the fender applique.
3. Use a trim stick C-4755 or equivalent, separate the fender applique (3) from the fender (2).




NOTE: It is not necessary to remove the hood to replace one or both hinges. The hinges can be replaced one at a time.

4. Remove hood support cylinder, Removal.




5. Using a grease pencil or equivalent, mark position of hinge (2).
6. Remove nuts (3) attaching hinge (2) to the body.
7. Remove nuts (1) attaching hinge (2) to hood.
8. Remove hinge (2) from the vehicle.