Front

FRONT





1. Install caliper (4) to the caliper adapter (5).
2. Coat the caliper mounting bolts (3) with silicone grease. Begin with the bolt closet to the bleeder screws (top), Then install and tighten the bolts to 37 Nm (28 ft. lbs.).

CAUTION: Verify brake hose is not twisted or kinked before tightening fitting bolt.

3. Install the brake hose banjo bolt (2) and brake hose to the caliper (4) with new seal washers and tighten fitting bolt to 31 Nm (23 ft. lbs.) if removed.
4. Remove the prop rod from the vehicle.
5. Bleed the base brake system,Brake Bleeding OR Brake Bleeding.
6. Install the wheel and tire assemblies Removal and Replacement.
7. Remove the supports and lower the vehicle.
8. Verify a firm pedal before moving the vehicle.