Right Front Brake Line/Hose

RIGHT FRONT BRAKE LINE/HOSE





1. Install the line/hose (4).
2. Install the brake hose banjo bolt (3) at the caliper.
3. Reconnect the wheel speed sensor routing clips (1) to the hose (4).
4. Install the tire and wheel assembly.
5. Lower the vehicle.




6. Install the mounting clips on the studs (1).
7. Install the brake line to the HCU.
8. Install the air box assembly.
9. Reconnect the electrical connectors to the body control module on the inner fender.
10. Remove the prop rod from the brake pedal.
11. Bleed the brake system Brake Bleeding.