Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2008 >> Nitro 2WD V6-4.0L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Engine Lubrication >> Oil Pump >> Service and Repair >> Removal and Replacement >> Engine Oil Pump - Installation

Engine Oil Pump - Installation







INSTALLATION





1. Prime oil pump (4) before installation by filling rotor cavity with clean engine oil.
2. Install oil pump (4) and gasket (3) carefully over the crankshaft. Position pump onto block and tighten bolts to 28 Nm (250 in. lbs.).




3. Install new O-ring (3) on oil pickup tube (1).
4. Install oil pickup tube (1).
5. Install oil pan. Engine Oil Pan - Installation
6. Install crankshaft sprocket. Removal and Replacement
7. Install timing belt. Removal and Replacement
8. Install the timing belt covers. Service and Repair




9. Install the crankshaft vibration damper (4). Service and Repair
10. Install the accessory drive belt (7). Removal and Replacement
11. Fill the cooling system. Service and Repair
12. Fill engine crankcase with proper oil to the correct level.
pro multis · About Operation CHARM