Power Steering Pump - Installation

4.0L





1. Install power steering pump back in engine compartment using reverse order of its removal.
2. Install three power steering pump mounting bolts (3) through pulley. Tighten pump mounting bolts to 28 Nm (21 ft. lbs.).

NOTE: Before installing power steering pressure hose on power steering pump, replace O-ring on end of power steering pressure hose. Lubricate O-ring using clean power steering fluid.

3. Install pressure line (2) into pump. Thread pressure line tube nut into pump and tighten to 27 Nm (20 ft. lbs.).
4. Install return line into the reservoir.
5. Install power steering belt (1). Accessory Drive Belt - Installation
6. Install the fan shroud.
7. Install the washer/coolant reservoir assembly.
8. Install air cleaner housing Air Cleaner Housing - Installation.
9. Fill and bleed power steering system Service and Repair.
10. Inspect for leaks.