Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (This is the last day we'll be asking)
Engine Coolant Temperature Sensor - Removal
3.7L ENGINE
WARNING: Hot, pressurized coolant can cause injury by scalding. Cooling system must be partially drained before removing the coolant temperature sensor.
1. Partially drain the cooling system.
2. Disconnect the electrical connector from the ETC sensor (3).
3. Remove the sensor from the intake manifold (4).