A/C Heater Control - Installation

INSTALLATION





NOTE: Single zone A/C-heater control shown. Dual zone similar.

1. Position the A/C-heater control (2) into the back of the instrument panel center bezel (1).
2. Install the four screws (3) that secure the A/C-heater control to the center bezel. Tighten the screws to 2.2 Nm (20 in. lbs.).
3. Connect the wire harness connectors (4 and 5) to the back of the A/C-heater control and install the instrument panel center bezel Instrument Panel Center Bezel - Installation .
4. Reconnect the negative battery cable.