Installation-Pick Up Models

REMOVAL-PICK UP MODELS





1. Disconnect and isolate both negative battery cables at batteries.
2. Remove four bolts (2) and EGR crossover tube cover (1).




3. Remove heat shield (2) over EGR valve (1).




4. Loosen and remove two clamps (1) and (6) at ends of EGR Crossover Tube.
5. Remove clamp mounting bolt (3) at center of EGR Crossover Tube.
6. Remove EGR Crossover Tube (4).
7. Remove and discard gaskets (doughnuts) at each end of tube (2) and (5).