Right - Link/Coil

RIGHT





1. Raise and support the vehicle.
2. Support the axle.
3. Disconnect the exhaust system at the manifold(s) (1).
4. Disconnect the exhaust bracket (4) at the transmission.
5. Disconnect the rubber exhaust mounts for the exhaust.
6. Raise the exhaust system up and back in order to gain access to the removal of the upper bolt (3).




NOTE: Discard the nuts and bolts and do not reuse. New nuts and bolts should be used when replacing or servicing the control arms.

7. Remove the nut (1) and bolt at the frame rail and remove the upper control arm (2).
8. Remove the upper control arm nut and bolt at the axle bracket.
9. Remove the control arm (2) from the vehicle.