Operation CHARM: Car repair manuals for everyone.
Home >> Dodge and Ram >> 2008 >> RAM 1500 Truck 2WD V6-3.7L >> Repair and Diagnosis >> Transmission and Drivetrain >> Drive/Propeller Shafts, Bearings and Joints >> Drive/Propeller Shaft >> Service and Repair >> Removal and Replacement >> Installation >> Rear LD

Rear LD







INSTALLATION





1. Slide slip yoke (1) onto automatic transmission/transfer case output shaft (2) with reference marks aligned.




2. If equipped with manual transmission, align transmission flange (1) and propeller shaft reference marks. Install new flange bolts (2) and tighten to 115 Nm (85 ft. lbs.).




3. If two piece propeller shaft, align center bearing (1) with reference marks on center bearing bracket and tighten bolts (2) to 54 Nm (40 ft. lbs.).




4. Align reference marks on propeller shaft and pinion flange. Install new companion flange (1) bolts and tighten to 115 Nm (85 ft. lbs.)

CAUTION: Failure to follow these instruction may result in a driveline vibration.
pro multis · About Operation CHARM